MD7PL LIGHTNING SURGE PROTECTOR FOR PULSE SIGNAL

Liên hệ Còn hàng

Thông tin sản phẩm

MD7PL

Lightning Surge Protectors for
Electronics Equipment M-RESTER

LIGHTNING SURGE PROTECTOR FOR
PULSE SIGNAL

(ultra-slim)
Functions & Features
• High discharge current capacity 20 kA (8 / 20 μs), 1 kA (10 / 350 μs)
• Ultra-thin 7-mm-wide module can be mounted
in high density
• Excellent protection employing multi-stage SPD circuits
• DIN rail mounting and grounding
• Shield terminal provided
• Protects two pulse signal lines

MODEL: MD7PL–[1][2][3][4]

ORDERING INFORMATION

• Code number: MD7PL-[1][2][3][4]
Specify a code from below for each of [1] through [4].
(e.g. MD7PL-PFF0/Q)
For the safety approval code 2, specify the product’s destination country using Ordering Information Sheet (No. ESU-8057).
• Specify the specification for option code /Q
(e.g. /C01)

[1] COMMON

P: Positive (PNP)
N: Negative (NPN)

[2] SHIELD TERMINAL (line / earth)

FF: Floating / Floating
FG: Floating / Grounding

[3] SAFETY APPROVAL

0: None
2: ATEX intrinsic safety

[4] OPTIONS

blank: none
/Q: With options (specify the specification)
(ATEX intrinsic safety not available)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to our web site.)
/C01: Silicone coating
/C02: Polyurethane coating

GENERAL SPECIFICATIONS

Construction: Slim-sized front terminal structure
Degree of protection: IP20
Connection: Euro terminal block (torque 0.3 N·m)
Applicable wire size: 0.2 – 2.5 mm², stripped length 8 mm
Grounding: DIN Rail
Housing material: Flame-resistant resin (black)

INSTALLATION

Operating temperature: -25 to +85°C (-13 to +185°F)
(See Safety Parameters for use in a hazardous location.)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: DIN Rail (TH35-7.5, 1-mm-thick)
Oxide film on the surface of an aluminium DIN rail may lower the electric conductivity between this module and the ground. Use a steel or copper rail.
Weight: 70 g (2.5 oz)